6 PACK -11 once White sublimation mugs MULTI 6 COLORS inner color and handle with reinforced foam box packaging
Link to SDN Custom Amazon Canada
Each mug is a Styrofoam mold then in in its own white for easy safe shipping.
It will save you time on preparation, cost of boxes , bubble wraps
Comes in boxes of 6 pcs
Heat press instructions
- Attach the transfer securely to the Ceramic Mug using SDN Sublimation Heat Tape.
- Cover the transfer with protective paper, making sure not to extend the paper excessively beyond the top and bottom of the mug.
- Position the Ceramic Mug inside the Mug Press and securely close the heating element around the mug.
- Apply medium pressure and set the temperature to 400°. Keep the mug pressed for 4 minutes and 30 seconds.
- Use a soft wet cloth or a dish sponge to remove any remaining paper residue.
Step-by-Step Instructions for Operating an Oven:
- Begin by preheating the oven to a temperature of 400 degrees Fahrenheit.
- Cut out the provided template and securely attach it to your mug using tape, ensuring a tight fit. (Optional: If you intend to add a handle design, ensure it is firmly taped down.)
- Create a small slit approximately 2 inches from the bottom of the shrink wrap. Slide the wrap over the mug, making sure the handle is positioned outside.
- To prevent any separation during the heating process, tape either the mug or the shrink wrap under the handle securely.
- Tuck any excess shrink wrap into the mug and evenly tighten the wrap by using a heat gun to apply hot air.
- Place the mug with the shrink wrap in the preheated oven and allow it to bake for 13 minutes.
- Exercise caution when removing the mug wrap and paper from the hot mug immediately after taking it out of the oven.
- Allow the mug to cool by placing it under a fan or utilizing a Kool Plate.
Additional Items Required: SDN Heat Tape
Recommended Paper: SDN Sublimation paper